Size: 2 oz (56.7g)
Units per case: 12
1. Surface must be clean, dry and free of oil and grease.
2. Pierce ends of resinand hardener tubes with self puncturing cap.
3. Squeeze equal amounts from each tube onto a clean surface and mix thoroughly until color is uniform. Mix only what can be used in 4 minutes. (Setting time slightly longer at cooler temperatures, below 45°F (7°C).)
4. Apply mixture to surface to be repaired. When bonding two surfaces, only slight pressure is required while product sets. Does not bond to Polyethylene or Polypropylene Plastics.
Causes skin irritation and serious eye irritation
May cause an allergic skin reaction
May cause cancer
Precautionary Statements – Prevention: Contains: Contains: Magnesium Silicate, Bisphenol A-Epichlorhydrin resin, Glass oxide. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Wear protective gloves/protective clothing/eye protection/face protection. Avoid breathing dust/fume/gas/ mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace.
Precautionary Statements – Response: IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse.
Precautionary Statements – Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Precautionary Statements – Disposal: Dispose of contents/container to an approved waste disposal plant.
Keep out of the reach of children.